Engineering high-durability Type 1 & Type 2 Surge Protective Devices (SPDs), High-Voltage Solar Fuses, DC Circuit Breakers, and Custom PV Combiner Boxes in Yueqing, Wenzhou—The World's Electrical Manufacturing Hub.
In high-voltage photovoltaic infrastructure, industrial automation, and commercial power distribution grids, direct lightning currents and severe switching transients represent catastrophic failure risks. Operating from the Yueqing Economic Development Zone, Luck (Zhejiang) New Energy Co., Ltd. (brand name Mday) stands as a premier China wholesale Type 1 surge protector manufacturer and OEM partner. Our manufacturing operations combine automated injection moulding, robotic contact insertion, and rigorous 100% finished-product impulse testing to ensure maximum reliability across global energy markets.
Explore our factory-direct portfolio engineered for solar array strings, AC service entrances, and energy storage system (BESS) panels.
In international power distribution standards (IEC 61643-11 and EN 61643-11), surge protective devices are split into rigorous test classes based on impulse waveforms. Type 1 (Class I) SPDs are specifically engineered to divert the extreme energy discharged during direct lightning strikes or strikes to external lightning protection systems (LPS).
The standard benchmark for Class I testing is the 10/350 µs impulse current waveform ($I_{imp}$). This waveform features a fast rise time of 10 microseconds to reach its peak value and a long decay time to 50% peak value at 350 microseconds. The specific charge ($Q$) and energy integral ($\int i^2 dt$) generated by a 10/350 µs pulse are up to ten times greater than those of an 8/20 µs waveform (used for Type 2 testing). Consequently, a standard Type 2 MOV arrester will experience thermal runaway and physical rupture if subjected to a direct 10/350 µs lightning flash, underscoring the vital need for dedicated Type 1 robust architectures at service entrance main switchboards (LPZ 0A to LPZ 1 boundary).
China wholesale Type 1 surge protector factories utilize three core design topologies to address high $I_{imp}$ energy handling while maintaining low voltage protection levels ($U_p$):
Uses heavy copper gas-discharge electrodes. Offers ultra-high impulse current capacity ($I_{imp} \ge 25\text{kA}$ per pole) and zero continuous leakage current. Ideal for main power entrances where extreme surges occur.
Employs large-format 34mm or 60mm square Zinc Oxide Varistor ceramic discs. Provides extremely fast response time ($t_a < 25\text{ns}$) and precise voltage clamping without generating power-frequency follow current.
Combines Spark Gap technology in series or parallel with Metal Oxide Varistors. Eliminates follow current interruption issues while guaranteeing ultra-low $U_p \le 1.5\text{kV}$, conforming to Class I+II unified standards.
| Technical Parameter | Standard Symbol | Typical Commercial Range | Engineering Selection Criteria |
|---|---|---|---|
| Impulse Discharge Current (10/350µs) | $I_{imp}$ | 12.5kA, 25kA, 50kA per pole | Depends on risk assessment (IEC 62305-2) and external LPS class. |
| Nominal Discharge Current (8/20µs) | $I_n$ | 20kA to 60kA | Determines lifespan over repeated indirect switching transients. |
| Voltage Protection Level | $U_p$ | 1.2kV – 2.5kV | Must be lower than the impulse withstand voltage ($U_w$) of downstream equipment. |
| Max Continuous Operating Voltage | $U_c$ | 275V, 385V, 440V AC / 1000V, 1500V DC | Must account for grid voltage fluctuations (+10% to +15% safety margin). |
| Short-Circuit Current Rating | $I_{scCR}$ | 25kA – 100kA rms | Max prospective short-circuit current from the utility transformer. |
Strategic insights for global OEM importers, wholesalers, EPC contractors, and brand distributors.
Next-generation Type 1 arresters incorporate RS-485 Modbus, NB-IoT, or wireless sensors to track continuous MOV thermal degradation, leakage current micro-amps, and cumulative lightning pulse counts in real time.
As utility-scale solar arrays shift from 1000V to 1500V DC operating topologies, Type 1/2 DC SPDs require dynamic rotary arc-extinguishing chambers to handle zero-crossing DC arcing safety.
Leading distributors prioritize factories that manufacture core varistor components (34mm MOV blocks) in-house. This vertical integration guarantees batch consistency, tighter clamping tolerances, and reduced unit costs.
Global environmental regulations (RoHS 3.0 & REACH) demand halogen-free, VO flame-retardant polyamide enclosures that eliminate toxic fume emission during catastrophic thermal runaway breakdown.
Verified manufacturing power backed by certified engineers, onsite third-party audits, and end-to-end OEM customization.
Situated on 4th Floor, 299 Weishi Road, Yueqing Economic Development Zone, Wenzhou—providing immediate supply chain integration with top-tier raw copper, MOV ceramic, and engineering polymer suppliers.
Equipped with 9 high-precision testing instruments, including high-voltage generator impulse testers, thermal disconnector calibration stations, and temperature-rise test benches, overseen by 5+ specialized engineers.
Full support for custom current ratings ($I_{imp}$ 12.5kA–50kA), private laser marking, custom enclosure color injection, tailored multi-pole configurations, and custom PV combiner box pre-wiring.
Our products strictly comply with VDE, TÜV, CE, UL 248-19, IEC 60269-6, and IEC/EN 60947-2 standards, facilitating smooth customs clearance and utility approval in Europe, Americas, and Asia-Pacific.
Addressing technical, procurement, and quality assurance queries for China wholesale Type 1 surge protector sourcing.
Need custom voltage ratings, private labeling, or bulk wholesale quotations for your upcoming solar or electrical project? Speak directly with our application engineers.