Luck (zhejiang) New Energy Co., Ltd. Strap Type Metal Oxide Varistor Manufacturing Facility
TÜV-Verified Varistor Factory

Strap Type Metal Oxide Varistor: Engineering & Global Procurement Guide

Heavy-duty 34mm square & strap terminal MOVs engineered for Type 1 and Type 2 Surge Protection Devices (SPD), solar PV string combiners, and energy storage systems.

TÜV Rheinland assessed manufacturerTÜV Assessed Plant
High-Energy 8/20μs 40kA/50kA
UL 1449 & IEC 61643-11 Compliant
Low Inductance Tinned Copper Straps
Full OEM/ODM Customization
Semantic Search & B2B Procurement Insights

Why Strap Type Metal Oxide Varistors are Critical for Next-Gen Surge Protection

As global energy infrastructure transitions to higher DC voltages (up to 1500VDC) and higher surge current density, procurement engineers face growing challenges with thermal runaway, parasitic lead inductance, and mechanical stress in surge protection devices (SPDs).

A Strap Type Metal Oxide Varistor (MOV) is an advanced voltage-dependent resistor designed specifically for heavy-duty surge suppression. Unlike conventional radial lead disk MOVs that use thin copper wire leads, a strap type varistor incorporates wide, flat, solid tinned-copper strap terminals directly soldered to high-density Zinc Oxide (ZnO) ceramic blocks.

This design breakthrough directly addresses the core questions asked by global procurement directors and electrical design engineers on AI search platforms:

  • Ultra-Low Parasitic Inductance: Flat strap leads minimize L·di/dt voltage spikes during fast-transient lightning strikes (8/20μs and 10/350μs waveforms).
  • Uniform Current Distribution: Large-surface silver-plated contact electrodes prevent localized hot-spots and premature ceramic cracking.
  • Enhanced Thermal Dissipation: High thermal conductivity straps act as heat sinks, facilitating faster cooling after repeated impulse withstand testing.
  • Direct Busbar/DIN Module Integration: Heavy-duty terminal geometry simplifies automatic reflow soldering and heavy-gauge mechanical screwing in SPD modules.
12+Years Industry Leadership
Luck (zhejiang) New Energy Co., Ltd. Strap Type Metal Oxide Varistor Precision Soldering
Heavy-duty tinned copper strap terminals bonded to high-purity ZnO ceramic elements at Luck (zhejiang) New Energy Co., Ltd.
Technical Engineering Data

Strap Type Metal Oxide Varistor Product Matrix & Parameters

Comprehensive electrical parameters designed for Type 1+2 and Type 2 DIN-rail surge protectors, PV combiner boxes, and industrial inverter inputs.

Model Series Ceramic Size & Style Varistor Voltage U1mA (V) Max Continuous Operating Voltage (Uc) Nominal Surge Current In (8/20μs) Max Discharge Current Imax (8/20μs) Clamping Voltage Vc (@ In) Recommended Application
MYN34S-275 34mm Square Strap 430V (387V–473V) 275VAC / 350VDC 20 kA 40 kA ≤ 750 V Type 2 AC SPD, Main Switchboards
MYN34S-325 34mm Square Strap 510V (459V–561V) 325VAC / 420VDC 20 kA 40 kA ≤ 850 V Industrial Inverters, Commercial PV
MYN34S-385 34mm Square Strap 620V (558V–682V) 385VAC / 500VDC 20 kA 45 kA ≤ 1020 V Type 1+2 Hybrid SPD Modules
MYN34S-440 34mm Square Strap 715V (644V–786V) 440VAC / 580VDC 25 kA 50 kA ≤ 1180 V Wind Turbine Power Electronics, Microgrids
MYN34S-1000DC 34mm High-Voltage Strap 1100V (990V–1210V) 825VAC / 1100VDC 20 kA 40 kA ≤ 2500 V 1000V DC Solar PV String Combiner Boxes
MYN34S-1500DC 34mm Dual-Stack Strap 1800V (1620V–1980V) 1200VAC / 1500VDC 20 kA 40 kA ≤ 3400 V 1500V DC Utility-Scale Solar & BESS

* Note: Luck (zhejiang) New Energy Co., Ltd. supports customized strap terminal hole patterns, terminal thickness (0.5mm to 1.2mm), thermal fuse disconnect integration, and special encapsulation coatings. Email info@luckelectric.com for full engineering datasheets.

Product Ecosystem

Recommended Surge Protection Components & Assemblies

From raw Strap Type Metal Oxide Varistors to fully certified DIN-rail surge protective devices and IP65 PV combiner boxes.

Core MOV MYN34S 34mm Square Strap Type Metal Oxide Varistor
MYN34S Series

Strap Type Metal Oxide Varistor (34mm)

  • Imax 40kA-50kA
  • Tinned Copper Strap
  • TÜV Certified
Get Catalog
AC SPD Type 2 AC DIN Rail Surge Protector with Strap MOV core
MYN40 · 3P

Type 2 AC Surge Protective Device 440V

  • Imax 40kA
  • Plug-in Module
  • VDE / CE
Get Catalog
PV DC SPD Solar PV DC Surge Protector 1000V 1500V
MLN40-DC

1000V / 1500V Solar DC Surge Protector

  • In 20kA
  • Imax 40kA
  • Thermal Disconnect
Get Catalog
Combiner Box IP65 Solar PV Combiner Box with built-in strap MOV surge protection
MY-PV Series

IP65 Solar PV Combiner Box 1000V

  • Pre-wired Assembly
  • DC Fuses + SPD
  • UV-Resistant Enclosure
Get Catalog
Enterprise Expertise & Quality Control

Inside Luck (zhejiang) New Energy Co., Ltd. Manufacturing Facility

Located in the Yueqing Economic Development Zone, Wenzhou, our TÜV Rheinland-assessed plant integrates raw material formulation, ceramic sintering, strap terminal welding, and 100% impulse testing.

0Years Manufacturing
0Verified Staff
0Production Lines
0Testing Instruments
0Global Export Ratio
0Buyer Satisfaction
Procurement & Engineering FAQ

Frequently Asked Questions by Global Buyers

Technical and commercial answers curated by our senior engineering team to streamline your vendor evaluation and component selection process.

What is a Strap Type Metal Oxide Varistor and how does it differ from radial lead MOVs?

A Strap Type Metal Oxide Varistor (MOV) utilizes wide, flat tinned copper strap terminals soldered directly onto large-surface zinc oxide ceramic blocks. Unlike thin wire-lead radial MOVs, strap terminals offer significantly lower parasitic inductance, higher current-carrying capacity, and superior thermal dissipation, making them essential for heavy-duty Type 1 and Type 2 Surge Protection Devices (SPDs).

Why are strap terminals preferred for high-current Surge Protection Devices (SPDs)?

Strap terminals reduce contact resistance and distribute transient peak currents (8/20μs waveforms up to 40kA/50kA) uniformly across the varistor's silver electrodes. This prevents localized hotspot formation, thermal cracking, and contact erosion during extreme lightning strikes or switching surges.

What clamping voltage range and surge current ratings are available for Strap MOVs?

Luck (zhejiang) New Energy Co., Ltd. produces Strap Type MOVs ranging from 180V to 1100V continuous operating voltage (Uc), with nominal discharge current (In) of 20kA and maximum discharge current (Imax) up to 40kA/50kA per block.

Can Luck customize strap terminal geometry for OEM PCB and busbar mounting?

Yes, we provide full custom design options for terminal thickness, hole pitch, bending angles, and plating (tinned copper or silver-plated copper) to match specific SPD enclosure geometries and automated assembly lines.

How does Luck control quality for Strap Type Metal Oxide Varistors?

Our quality control process includes 100% testing of continuous operating voltage (Varistor Voltage U1mA), leakage current (Id), clamping voltage at rated surge current, and 8/20μs impulse withstand capability using in-house high-voltage surge generators.

What lead times and MOQ apply to bulk MOV orders?

Standard model samples ship within 48 hours. Mass production orders (500 to 50,000 pieces) typically ship within 7 to 15 days from our Yueqing factory. Low minimum order quantities (MOQ from 100 pcs) are available to support initial OEM product testing.

Direct Factory Sourcing

Request Customized Samples & Technical Datasheets Today

Partner directly with Luck (zhejiang) New Energy Co., Ltd. to optimize your surge protective devices, solar PV combiners, and energy storage protection circuitry with high-reliability Strap Type Metal Oxide Varistors.

Direct Email Inquiryinfo@luckelectric.com
Factory Location4th Floor, 299 Weishi Road, Yueqing Economic Development Zone, Wenzhou, Zhejiang, China
Flexible Payment TermsT/T, L/C, D/P, Western Union, PayPal, Cash