TÜV & VDE Certified Manufacturer

CE Certified Type 2 Surge Protector Exporter & Wholesaler

Engineering-grade AC & DC Transient Voltage Surge Suppression (TVSS) for Solar Photovoltaic Arrays, Industrial Power Grids, and Battery Energy Storage Systems (BESS)

Factory Direct Wholesale Catalog

Featured Low-Voltage Protection Devices & Surge Protectors

Explore our core product lineup manufactured in our TÜV Rheinland assessed facility, certified to international safety standards including IEC 61643-11, EN 50539-11, UL 248-19, and IEC/EN 60947-2.

Intelligent Universal Circuit Breaker MCB 1000V
Hot Selling 1-63amp Intelligent Universal Circuit Breaker MCB with 1000v Rated Voltage
View Product Specs
Copper 4-Pole 16A 1200V DC Isolator Switch IP66
Mday Copper 4-Pole 16A 1200V DC Isolator Switch IP66 Waterproof Disconnect Switch MYPV32-L2
View Product Specs
Solar Type 2 DC SPD 40kA 1000V 2P Surge Suppressor
Mday Solar Type 2 DC SPD 40kA 1000V 2P Lightning Protection Transient Voltage Suppressor
View Product Specs
T2 MYN40 3P VDE-certified 40KA 440V AC SPD
Mday T2 MYN40 3P VDE-certified 40KA 440V AC SPD Din Rail Surge Protector IP20 Copper
View Product Specs
T1+T2 MYH7 4P 385V VDE-certified AC SPD
Mday T1+T2 MYH7 4P 385V VDE-certified AC SPD Surge Protectors for Lightning Protection
View Product Specs
25A L7 500v RCCB Residual Current Circuit Breaker
25A L7 500v RCCB Residual Current Circuit Breaker 2-Pole Miniature Circuit Breaker
View Product Specs
T1+T2 MYH7 320V 7kA VDE Surge Protector SPD
Mday T1+T2 MYH7 320V 7kA VDE Surge Protector SPD Lightning Protection for Solar System
View Product Specs
DIN Rail ATS PC Class Dual Power Transfer Switch
Mday DIN Rail ATS PC Class Dual Power Automatic Transfer Switch 2P 63A 100A 125A
View Product Specs
Technical Whitepaper & Engineering Guide

Understanding Type 2 Surge Protection: Physics, Compliance, and Network Integration

In modern industrial electrification and renewable energy systems, transient overvoltages represent one of the primary causes of premature equipment failure, inverter degradation, and unscheduled plant downtime. Atmospheric lightning discharges, switching operations in upstream power grids, and inductive load switching generate high-energy voltage spikes that travel along AC distribution conductors and DC photovoltaic solar strings. As a premier CE certified Type 2 surge protector exporter and wholesaler, Luck (Zhejiang) New Energy Co., Ltd. manufactures heavy-duty Transient Voltage Surge Suppressors (TVSS) engineered to clamp lethal voltage transients down to safe residual voltage levels ($U_p$).

Core Engineering Function of Type 2 SPDs: Designed primarily according to IEC 61643-11 (for low-voltage AC networks) and EN 50539-11 / IEC 61643-31 (for solar photovoltaic installations), Class II / Type 2 Surge Protective Devices protect downstream sensitive electronics by discharging nominal surge currents ($I_n$, typical $8/20\,\mu\text{s}$ waveform) repeatedly without destruction, while handling maximum discharge currents ($I_{max}$) up to $40\text{kA}$ or $65\text{kA}$.

1. The Electromechanical Architecture of Heavy-Duty Type 2 SPDs

A high-performance Type 2 Surge Protective Device is far more than a simple passive MOV array. Our production process integrates four critical mechanical and electrical subsystems into a compact DIN-rail mountable module:

High-Energy MOV Core

Utilizes premium 34mm square Sintered Zinc Oxide Varistors (MOV) with tight voltage tolerance ($\pm 5\%$) ensuring symmetrical energy absorption across all phase channels.

Thermal Disconnect Safety

Patented low-temperature solder disconnect mechanism with spring-loaded lever that physically isolates the varistor during abnormal TOV or end-of-life thermal runaway.

Arc Quenching Chamber

Specialized internal barrier grids rapidly extinguish electric arcs generated when thermal disconnect springs release under maximum fault current stresses.

2. Essential Parameters for Engineering Selection & Technical Specification

Procurement teams, electrical engineers, and commercial solar EPCs must strictly evaluate five electrical parameters when specifying Type 2 SPDs for wholesale importation or system building:

  • Maximum Continuous Operating Voltage ($U_c$ / $U_{cpv}$): The maximum RMS or DC voltage that may be continuously applied to the SPD's protection modes. For AC mains, standard values include $275\text{V}$, $385\text{V}$, and $440\text{V}$. For DC solar arrays, common ratings reach $600\text{V}$, $1000\text{V}$, and $1500\text{V DC}$.
  • Nominal Discharge Current ($I_n$): The crest value of the $8/20\,\mu\text{s}$ surge current passing through the device 15 times sequentially without failure. Standard industrial benchmark is $20\text{kA}$.
  • Maximum Discharge Current ($I_{max}$): The absolute limit of $8/20\,\mu\text{s}$ current the SPD can safely withstand at least once without catastrophic housing rupture ($40\text{kA}$ to $65\text{kA}$).
  • Voltage Protection Level ($U_p$): The residual clamping voltage measured across the terminals during surge impulse. Must remain at least $20\%$ below the rated impulse withstand voltage ($U_w$) of downstream equipment (e.g., $U_p \le 1.5\text{kV}$ or $2.8\text{kV}$).
  • Short-Circuit Current Rating ($I_{SCCR}$): The maximum prospective fault current from the power grid that the SPD assembly can withstand safely in conjunction with its recommended upstream fuse or breaker protection.

12+

Years Manufacturing

70%

Global Export Share

100%

Full Routine Factory Test

33kA

DC Breaking Capacity

Market Intelligence & Strategy

Future Procurement Trends in Industrial Surge Protection & PV Safety

As the global energy transition accelerates, low-voltage distribution and renewable energy infrastructure face evolving operational challenges. B2B importers, distributors, and panel builders must align their sourcing with critical technology shifts.

1. Transition to 1500V DC Utility & C&I PV Architectures

Global solar PV deployments are shifting rapidly from traditional 1000V DC strings to 1500V DC systems to reduce balance-of-system (BOS) cabling costs. Wholesalers must ensure their SPD catalog features $U_{cpv} = 1500\text{V DC}$ rated Type 2 suppressors equipped with Y-configuration MOV topologies to prevent dangerous common-mode current loops under ground fault conditions.

2. IoT Integration & Smart Condition Monitoring

Unmonitored surge arresters can age silently after absorbing multiple lightning strikes. Procurement trends show explosive demand for Type 2 SPDs equipped with integrated RS485 Modbus communications, dry auxiliary contacts, or smart microprocessors that report real-time MOV degradation, strike counts, and physical disconnect state to SCADA systems.

3. Zero Leakage Current Hybrid (GDT + MOV) Systems

Conventional MOVs experience continuous low-level leakage current, leading to elevated working temperatures and accelerated aging. Sourcing preference is rapidly transitioning to hybrid series structures combining Gas Discharge Tubes (GDT) and MOVs. This eliminates static leakage current completely and prevents premature thermal runaway under temporary overvoltages (TOV).

4. Modular Plug-and-Play Cartridges & Field Replaceability

Modern commercial specifications demand DIN-rail base units with removable plug-in protection modules. When an MOV reaches its end of life, site technicians can perform cartridge replacement in seconds without removing main terminal wiring or interrupting power line continuity, significantly lowering operational expenditures (OPEX).

Technology Deep Dive

R&D Trends: Next-Generation Varistor Engineering and Fire Safety

The core performance of any Type 2 surge protector hinges on material purity, manufacturing tolerances, and flame-retardant housing engineering. Research and development teams at our Yueqing production center focus continuously on three key technology pillars:

Advanced Zinc Oxide (ZnO) Grain Boundary Engineering

By doping Zinc Oxide powder with bismuth, cobalt, and manganese oxides in micro-calibrated proportions, our automated sintering kilns produce 34mm square MOVs with exceptionally uniform grain boundary distribution. This uniform micro-structure prevents localized hot spots during high current discharge ($8/20\,\mu\text{s}$ wave up to $40\text{kA}$), preventing physical cracking and voltage degradation across hundreds of operational surge cycles.

Dual Thermal Disconnect and Low-Solder Melting Point Alloys

Traditional SPDs rely on simple solder joints that may react too slowly during low-current TOV fault scenarios, risking housing overheating. Our advanced Type 2 arresters incorporate double-action thermal cutoffs utilizing proprietary low-temperature eutectic alloy solder joints combined with high-tension stainless steel springs. When internal varistor temperatures exceed $120^\circ\text{C}$, the solder releases cleanly, throwing open a high-speed mechanical shutter that isolates the MOV before thermal degradation can damage adjacent switchgear.

Protection Parameter Standard Commercial SPD Luck New Energy Type 2 SPD Engineering Advantage
MOV Core Specification 20mm – 25mm Round Disc 34mm Heavy-Duty Square Block +40% Surge Current Capacity & Energy Dissipation
Thermal Disconnect Speed 12 – 25 Seconds < 3 Seconds (Dual Spring) Prevents Localized Fires & Fire Hazards
Housing Flame Retardancy UL94 V-2 Standard Nylon UL94 V-0 Self-Extinguishing PA66 Zero Ignition, Zero Melting Droplets
Module Status Indicator Mechanical Color Switch Only Visual Window + Remote Contact Signal Enables Automated Remote SCADA Alarming
Impulse Verification Batch Sample Testing 100% Impulse Verification Lab Tested Zero Defect Sourcing Assurance
Why Partner With Us

Enterprise Advantages: TÜV Rheinland Verified Factory Direct Export

Based in the Yueqing Economic Development Zone, Wenzhou—the global hub of electrical equipment manufacturing—Luck (Zhejiang) New Energy Co., Ltd. delivers verified production excellence, transparent supply chains, and specialized OEM/ODM support for international buyers.

Onsite TÜV Rheinland Audit

Our 55+ verified staff, 3 automated assembly lines, and 9 specialized testing instruments have been thoroughly audited on-site by TÜV Rheinland. Full assessment reports are available directly to prospective buyers.

VDE, CE & UL Compliance

Our Type 2 AC and DC SPDs carry authentic VDE certifications and CE compliance. Fuses meet UL 248-19 and IEC 60269-6, while DC breakers conform strictly to IEC/EN 60947-2 specifications.

Full OEM & ODM Customization

Backed by 7+ years of dedicated OEM expertise, we support complete private labeling, custom rating adjustments, custom shell color injection, specialized packaging, and tailored combiner box pre-wiring.

Technical Sourcing Knowledge Base

Frequently Asked Questions for B2B Importers & EPC Engineers

Detailed engineering answers regarding Type 2 surge protective devices, system design, compliance certifications, and wholesale procurement terms.

What is the exact functional difference between a Type 1 and Type 2 Surge Protector?

A Type 1 (Class I) SPD is designed to protect electrical installations against direct lightning strikes and is tested using a heavy $10/350\,\mu\text{s}$ impulse current waveform ($I_{imp}$). It is installed at the main service entrance where direct lightning risk exists. A Type 2 (Class II) SPD protects against indirect lightning strikes, induced switching overvoltages, and grid transients using an $8/20\,\mu\text{s}$ discharge current waveform ($I_n / I_{max}$). It is installed at sub-distribution panels, inverter AC outputs, and DC solar PV combiner locations downstream of main service entry points.

Why do DC Photovoltaic Systems require dedicated DC-rated Type 2 SPDs?

Direct Current (DC) arcs do not possess a natural zero-voltage crossing point unlike Alternating Current (AC). If an AC surge protector is accidentally connected to a high-voltage DC string (e.g., 1000V DC), an internal failure will sustain a continuous high-temperature DC arc that cannot self-extinguish, leading to severe fire hazards. Dedicated Solar DC Type 2 SPDs utilize specialized internal contact arc chutes, Y-connected MOV configurations, and elevated DC voltage ratings ($U_{cpv}$) designed explicitly to break high-voltage DC fault currents safely.

Which international standards do your Type 2 SPDs comply with for global export?

Our low-voltage surge protective devices are engineered, batch tested, and certified in full compliance with IEC 61643-11 (for AC low voltage power systems), EN 50539-11 and IEC 61643-31 (for solar photovoltaic installations), and carry CE marking along with VDE certification on flagship models. Additionally, our DC fuse components conform to UL 248-19 and IEC 60269-6 standards.

How do remote indication contacts operate on your DIN-rail Type 2 SPDs?

Our modular Type 2 SPDs feature an integrated 3-terminal microswitch dry contact (NO/NC/COM). Under normal operation, the mechanical thermal disconnect holds the microswitch in its rest state. If an internal MOV degrades or disconnects due to a severe overvoltage event, the internal spring mechanism moves the physical flag (turning visual indicator from Green to Red) and simultaneously toggles the remote auxiliary contact. This triggers immediate automated alarms in connected SCADA, PLC, or remote monitoring systems.

What are your minimum order quantities (MOQ) and production lead times for wholesale orders?

For standard model Type 2 SPDs, DC circuit breakers, and fuse holders, our minimum order quantity ranges from 5 to 200 units depending on the model series. Standard catalog items ship within 2 to 7 days from our Yueqing factory. Custom OEM orders, including custom logo printing, specialized voltage ratings, and custom-configured IP65 combiner boxes, typically ship within 14 to 21 days following sample approval.

How does Luck New Energy ensure quality control across mass production batches?

Quality management follows a multi-tier inspection framework: 100% incoming raw material inspection (IQC) for MOV varistors and PA66 housing plastics; automated in-process testing during assembly across our 3 production lines; and 100% routine testing of finished units using our 9 in-house surge generators and dielectric withstand instruments prior to packing and export dispatch.

Can you provide full private label branding and customized packaging for distributors?

Yes. We offer complete OEM branding services including laser marking or pad printing of your brand logo onto product cartridges, customized serial numbers, custom color injection moulding for plug-in cartridges, custom inner box artwork, and outer export carton branding backed by over 7 years of contract manufacturing experience.

Request Full Technical Specifications & Wholesale Catalog

Partner directly with a TÜV-verified manufacturer. Get comprehensive datasheets, factory-direct wholesale pricing, and sample evaluation units for your engineering projects.