1000V 32A IP66 Enclosed Photovoltaic DC Isolator Switch
- 1000V DC
- 32A DC-PV2
- IP66 Waterproof
- Padlockable
Pre-assembled UV-resistant housing with built-in MC4 connectors or cable glands for external rooftop deployment.
Get CatalogIn solar photovoltaic (PV) generation and battery energy storage systems (BESS), the Photovoltaic DC Isolator Switch serves as the fundamental safety disconnect device required by international electrical codes. Unlike Alternating Current (AC) electrical distribution where current naturally drops to zero 100 or 120 times per second, Direct Current (DC) from solar panel strings flows continuously without a zero-crossing point. When a technician opens a live DC circuit under load, an electric arc forms immediately across the separating contacts. If the disconnect switch cannot extinguish this arc in milliseconds, temperatures can exceed 3,000°C, leading to contact melting, thermal runaway, electrical fires, and complete inverter loss.
At Luck (zhejiang) New Energy Co., Ltd., our engineering team focuses on solving the critical physics of DC arc management. Designed to meet strict IEC/EN 60947-3 (DC-PV1 and DC-PV2 utilization categories) and AS/NZS 60947.3 standard requirements, our Photovoltaic DC Isolator Switches incorporate patented knife-edge self-cleaning contacts, permanent magnet arc quenching chutes, and an independent spring-driven operator mechanism that breaks contacts in less than 3 milliseconds—completely removing operator hand-speed dependency.
Engineered for string inverters, central combiner boxes, residential solar installations, and commercial energy storage units.
Pre-assembled UV-resistant housing with built-in MC4 connectors or cable glands for external rooftop deployment.
Get Catalog
Optimized for high-capacity C&I string inverters and solar PV array combiner boxes.
Get Catalog
Ideal for interior distribution boards, indoor solar control units, and hybrid inverter cabinets.
Get Catalog
Engineered specifically for battery storage charge/discharge circuits with zero polarity sensitivity.
Get CatalogAs the global solar energy industry scales towards gigawatt-level deployments, B2B procurement managers, EPC system integrators, and OEM inverter manufacturers face changing technical criteria for circuit breaking components. Understanding these key engineering shifts provides significant purchasing advantages:
Utility-scale and large commercial & industrial (C&I) solar power plants are standardizing on 1500V DC architectures. Higher system voltages reduce balance-of-system (BOS) costs, cabling losses, and string count. However, 1500V DC requires isolator switches with greater creepage distances, arc-extinguishing capabilities, and contacts capable of breaking up to 1500V DC under full load without dielectric breakdown. Modern 1500V Photovoltaic DC Isolator Switches utilize 4-pole series connection bridges to divide the voltage stress across multiple break points.
Traditional PV isolator switches were designed for unidirectional solar string current flowing from panels to inverters. With the explosive growth of hybrid solar plus storage systems, DC disconnect switches must now handle bidirectional current flow. When battery systems discharge into grid inverters or absorb charge during high-yield hours, the switch must reliably isolate under load in both directions. Luck (zhejiang) New Energy Co., Ltd. incorporates non-polarized magnetic blowouts and dual-knife contact geometry to ensure 100% bidirectional isolation safety.
Firefighters facing rooftop PV fires require guaranteed physical isolation points. Standard national regulations (including NFPA 70 / NEC 690.12 in the US and AS/NZS 5033 in Australia) demand visible, lockable, weatherproof outdoor switches installed adjacent to PV arrays. Modern DC isolator switches feature IP66/IP69K sealing against high-pressure water jets, UV-stabilized polycarbonates that resist embrittlement over 25 years, and triple-padlock safety handles to prevent unauthorized switching during routine maintenance.
| Technical Parameter | 1000V Standard DC Switch | 1500V Utility-Grade DC Switch | BESS Bidirectional DC Switch |
|---|---|---|---|
| Rated Operational Voltage (Ue) | 1000V DC | 1500V DC | 1000V / 1500V DC |
| Rated Current (Ie @ DC-PV2) | 16A, 25A, 32A | 32A, 50A, 63A | 32A, 50A, 63A, 80A |
| Contact Break Time | < 5 ms | < 3 ms | < 3 ms |
| Polarity Dependency | Polarized (Directional) | Non-Polarized / Series Bridged | 100% Non-Polarized Bidirectional |
| Enclosure Rating | IP65 / IP66 | IP66 / IP69K | IP66 Panel / Enclosed |
| Standards Compliance | IEC 60947-3, CE | IEC/EN 60947-3, AS/NZS 60947.3 | IEC 60947-3, UL 508i |
Luck (zhejiang) New Energy Co., Ltd. is a specialized manufacturer of photovoltaic protection and low-voltage distribution components. Situated in the Yueqing Economic Development Zone, Wenzhou, Zhejiang, China, our facilities integrate complete internal tooling, plastic injection moulding, automated contact stamping, spring mechanism calibration, and comprehensive electrical testing under one roof.
With over 12 years of industry engineering experience, 7 years of dedicated OEM/ODM export service, and an onsite factory assessment verified by TÜV Rheinland, we supply top-tier solar distributors, EPC contractors, and inverter manufacturers across Europe, Southeast Asia, Latin America, and the Middle East.
Full production quality control guarantees that every Photovoltaic DC Isolator Switch operates safely across its 25-year service life.
UL94-V0 rated flame-retardant enclosures moulded in-house under strict temperature controls.
High-purity silver alloy contacts assembled for zero oxidation and ultra-low contact resistance.
Every switch undergoes temperature rise, dielectric withstand, and mechanical operation tests.
Explore our onsite facility, raw materials, terminal stamping, housing molds, and packaging processes.
In-depth technical and purchasing answers designed for procurement managers, solar installers, and electrical engineers.
Direct Current (DC) does not possess a natural zero-crossing point like Alternating Current (AC). When opening a live DC circuit, an electrical arc sustains continuously across the opening contacts. A purpose-built Photovoltaic DC Isolator Switch utilizes patented magnetic arc quenching chutes, knife-edge contacts, and a high-speed spring-loaded snap-action mechanism (opening time <3ms) to instantly stretch and extinguish DC arcs up to 1500V before contact erosion or thermal breakdown occurs.
In high-voltage PV strings, slow contact separation causes prolonged arcing, generating extreme localized temperatures over 3000°C. This burns contact contacts, melts switch housings, and poses severe fire hazards. Luck's Photovoltaic DC Isolator Switches feature an independent operator snap-action switch gear that operates independently of the handle speed, breaking contacts in under 3 milliseconds to guarantee arc clearance under DC-PV2 utilization categories.
Global solar installations require compliance with international standards such as IEC/EN 60947-3 (DC-PV1, DC-PV2 categories), AS/NZS 60947.3 for Australian market grid connection, UL 508i for North America, and CE marking. Additionally, outdoor enclosures must pass IP66/IP69K ingress protection, UV resistance testing (UL 746C), and thermal degradation assessments.
Pole configuration depends on string layout and system earthing. A 2-pole switch isolates one DC string (positive and negative). A 4-pole switch can isolate two separate DC strings or be wired in series to boost voltage breaking capability up to 1500V DC. An 8-pole switch accommodates multi-MPPT inverters where four strings need simultaneous manual isolation.
Yes. Luck (zhejiang) New Energy Co., Ltd. provides full OEM/ODM manufacturing. We customize terminal bridge wiring, housing colors, private brand laser etching, IP66 lockable rotary handles, MC4 solar connector pre-assemblies, and custom packaging backed by over 7 years of OEM engineering experience.
Solar isolator switches installed on rooftops or in array combiner boxes experience high ambient temperatures. Luck utilizes self-extinguishing flame-retardant PC materials (UL94-V0) and high-density silver alloy contacts (AgNi/AgCdO) to maintain stable continuous current rating up to +70°C, minimizing current derating requirements compared to standard industrial switches.
Contact our engineering team directly to obtain complete product catalogs, CAD dimensions, TÜV test reports, and factory-direct quotation sheets.